Revo performance software programs are switchable via the OBD2 port on your car using the Revo select device. Simply select a program, plug in, turn the ignition switch to the on position, wait a few seconds, remove the select device and start the car. There is no fixed switch to alert to any modification.
Revo - Innovators of Serial Port Switching to the aftermarket.
The 'select plus' features variable boost, timing and fuel adjustment allowing the user to set the car to run efficiently with any fuel quality and in varying conditions. The 'select plus' consists of a diagnostic port interface, USB cable and new PC based software. Boost, timing and fuel adjustments can be loaded directly to the ECU using the software communications mode. The 'select plus' not only features the 2 default performance modes like the 'select' version, but also includes an additional 3 "user based" modes. These modes allow the user to custom configure their performance settings and upload them to the 'select plus'. Changes to ECU settings can then be made using just the 'select plus'. These saved settings can be changed and re-saved using the software as your mechanical or environmental conditions permit. With the 'select plus' for Porsche software you can monitor parameters of the engine (boost, timing, fuel etc.) after making changes so you can optimize performance for your specific hardware and conditions. Combined with the ability to revert to stock programming, and Revo's unique Anti-theft mode, the 'select plus' is unmatched in its ability to provide the highest levels of control and flexibility.
Revo SPS® select plus Serial Port Switch - US $349
Installs on your car in just minutes!
Appointments scheduled to install REVO on your car in North, South & Central Coast of CaliforniaFOR AN APPOINTMENT - CALL
Northern California: Palo Alto (650) 461-9045
Central Coast: San Luis Obispo (805) 574-4996
Southern California: Newport Beach (949) 200-7997
